Additional information
| Weight | 93 lbs |
|---|---|
| Manufacturer | Warn |
Back to Warn Winches
Warn 27550 XD9000i Self-Recovery 9000lb Winch
No-load retrieval line speed of 38′ per minute. Integrated solenoid. Runs cool with low amp draw for long winching duty cycles. Comes with 125′ of 5/16″ wire rope.
- Integrated control box provides excellent protection to electronics
- Exclusive brake design provides superior control while winching
- Durable 3-stage planetary geartrain for smooth, reliable, operation
- Series-wound, high-speed motor provides fast line speed and strong pulls
- Chip-resistant, powder-coated finish
- Remote control with 12′ (3.7m) lead
- Durable 5/16″ (8mm) diameter galvanized steel wire rope.
XD9i Specs/Part Numbers:
- Part Numbers: 27550
- Winch Model: XD9i
- Rated Line Pull: 9,000 lbs. (4080 kgs) single-line
- Motor: Series Wound 12V 4.6 hp
- Electrical controls: Solenoid
- Remote Control: Remote switch, 12′ (3.7m) lead
- Geartrain: 3-Stage Planetary
- Gear ratio: 156:1
- Clutch (freespooling): Sliding Ring Gear
- Brake: Automatic Direct Drive Cone
- Drum diameter/Length: 2.5″ /9.0″ (6.4cm/23cm)
- Weight: 85 lbs. (38.5kgs.)
- Wire rope: 125′, 5/16″ dia. (38m, 8mm)
- Fairlead: Roller
- Recommended Battery: 650 CCA minimum for winching
- Battery leads: 2 gauge, 72″ (1.83m)
- Finish: Argent Gray Powder Coat
Amazon’s Price:
Only logged in customers who have purchased this product may leave a review.
Related products
Warn 96800 VR8 8000lb Winch
The new WARN VR8 offers enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack has a tactical look and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. The VR8 also offers the fastest no-load line speed in the VR family.
- 8,000 lb. capacity
- Black tactical look puts you at the head of the off-road pack
- Waterproof Albright® contactor control for the ultimate in reliability
- One-piece tie plate replaces tie rods for added strength and rigidity
- Convertible control pack allows upright or low-profile winch mounting
- Durable steel rope
- Powerful, efficient series-wound motor
- Best-in-class load-holding cone brake for superior control
- Designed, engineered, and field tested by Warn engineers in Clackamas, OR
- Class-leading limited lifetime warranty
- Winch model: VR8
- Part number: PN 96800
- Rated line pull: 8000 lbs. (3629 kgs)
- Motor: 12V DC, Series Wound
- Electrical controls: Contactor
- Remote Control: Remote switch, 12 ft. (3.7m) Lead
- Geartrain: 3-Stage Planetary
- Gear ratio: 216:1
- Clutch (freespooling): Rotating ring gear clutch
- Brake: Automatic Direct Drive Cone
- Drum diameter/Length: 2.5"/9.0" (6.73cm/23cm)
- Weight: 71.25 lbs. (32.3 kgs); Net product: 65.16 lbs. (29.5 kgs)
- Rope: Wire: 94', 5/16" diameter (24.38m, 8mm diam.)
- Fairlead: Cast Iron Hawse
- Recommended Battery: 650 CCA minimum for winching
- Battery leads: 0.98" x 6.5' (25mm x 2m)
- Finish: Powder coat over primer undercoating
- Warranty: Limited Lifetime
Warn 96815 VR10-S 10000lb Winch
The new WARN VR10-S offers enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack looks great and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. The 10,000 lb. capacity makes it perfect for Jeep JKU, half-ton pickups, and a many SUV applications.
- 10,000 lb. capacity
- Black tactical look puts you at the head of the off-road pack
- Waterproof Albright® contactor control for the ultimate in reliability
- One-piece tie plate replaces tie rods for added strength and rigidity
- Convertible control pack allows upright or low-profile winch mounting
- Standard Duty 3/8" X 90' synthetic rope with cast iron hawse fairlead
- Powerful, efficient series-wound motor
- Best-in-class load-holding cone brake for superior control
- Designed, engineered, and field tested by Warn engineers in Clackamas, OR
- Backed by a Limited Lifetime Warranty
- Winch model: VR10-S
- Part numbers: PN 96815
- Rated line pull: 10,000 lbs., (4536 kgs.) single-line
- Motor: 12V DC, Series Wound
- Electrical controls: Contactor
- Remote Control: Remote switch, 12' (3.7m) Lead
- Geartrain: 3-Stage Planetary
- Gear ratio: 261:1
- Clutch (freespooling): Sliding Ring Gear
- Brake: Automatic Direct Drive Cone
- Drum diameter/Length: 2.625" / 9.0" (6.73cm/23cm)
- Weight: Shippin: 64.81 lbs. (29.4 kgs); Net product: 58.73 lbs. (26.6 kgs)
- Rope: Synthetic: 90' x 3/8" (9.5mm x 27.4m)
- Fairlead: Cast Iron Hawse
- Recommended Battery: 650 CCA minimum for winching
- Battery leads: 2 gauge, 72" (1.83m)
- Finish: Powder coat over primer undercoating
- Warranty: Limited Lifetime
Warn 96805 VR8-S 8000lb Winch
The new WARN VR8-S offers enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack has a tactical look and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. The VR8-S also offers the fastest no-load line speed in the VR family.
- 8,000 lb. capacity
- Black tactical look puts you at the head of the off-road pack
- Waterproof Albright® contactor control for the ultimate in reliability
- One-piece tie plate replaces tie rods for added strength and rigidity
- Convertible control pack allows upright or low-profile winch mounting
- Standard Duty 3/8" X 90' synthetic rope with cast iron hawse fairlead
- Powerful, efficient series-wound motor
- Best-in-class load-holding cone brake for superior control
- Designed, engineered, and field tested by Warn engineers in Clackamas, OR
- Class-leading limited lifetime warranty
- Winch model: VR8-S
- Part number: PN 96805
- Rated line pull: 8000 lbs. (3629 kgs)
- Motor: 12V DC, Series Wound
- Electrical controls: Contactor
- Remote Control: Remote switch, 12 ft. (3.7m) Lead
- Geartrain: 3-Stage Planetary
- Gear ratio: 216:1
- Clutch (freespooling): Rotating ring gear clutch
- Brake: Automatic Direct Drive Cone
- Drum diameter/Length: 2.5" /9.0" (6.73cm/23cm)
- Weight: Shipping: 59.61 lbs. (27 kgs); Net product: 53.52 lbs. (24.2 kgs)
- Rope: Synthetic: 90' x 3/8" (9.5mm x 27.4m)
- Fairlead: Cast Iron Hawse
- Recommended Battery: 650 CCA minimum for winching
- Battery leads: 0.98" x 6.5' (25mm x 2m)
- Finish: Powder coat over primer undercoating
- Warranty: Limited Lifetime
Warn 96810 VR10 10000lb Winch
The new WARN VR10 offers enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack looks great and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. The 10,000 lb. capacity makes it perfect for Jeep JKU, half-ton pickups, and a many SUV applications.
- 10,000 lb. capacity
- Black tactical look puts you at the head of the off-road pack
- Waterproof Albright® contactor control for the ultimate in reliability
- One-piece tie plate replaces tie rods for added strength and rigidity
- Convertible control pack allows upright or low-profile winch mounting
- Durable steel rope
- Powerful, efficient series-wound motor
- Best-in-class load-holding cone brake for superior control
- Designed, engineered, and field tested by Warn engineers in Clackamas, OR
- Backed by a Limited Lifetime Warranty
- Winch model: VR10
- Part numbers: PN 96810
- Rated line pull: 10,000 lbs., (4536 kgs.) single-line
- Motor: 12V DC, Series Wound
- Electrical controls: Contactor
- Remote Control: Remote switch, 12' (3.7m) Lead
- Geartrain: 3-Stage Planetary
- Gear ratio: 261:1
- Clutch (freespooling): Sliding Ring Gear
- Brake: Automatic Direct Drive Cone
- Drum diameter/Length: 2.5"/9.0" (6.73cm/23cm)
- Weight: Shipping: 78.92 lbs. (35.8 kg); Net product: 72.84 lbs. (33 kgs)
- Rope: Steel: 80', 3/8" diameter (24.38m, 9.5mm diam.)
- Fairlead: Cast Iron Hawse
- Recommended Battery: 650 CCA minimum for winching
- Battery leads: 2 gauge, 72" (1.83m)
- Finish: Powder coat over primer undercoating
- Warranty: Limited Lifetime
Reviews
There are no reviews yet.