Back to Fuse & Relay Holders
MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof
- 10 AWG thick red pigtail wire allow you to splice it into any project.
- Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm
- Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in.
- Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine
- Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse
Amazon’s Price:
Related products
12V Waterproof Universal Fuse Relay Box
IP65 Waterproof 6-Slot ATC/ATO Fuse + 6-Slot 5-Pin Relay Box
Trying to organize harnesses, fuses, and relays can quickly have you driving in circles. Get your bearings with a dedicated, waterproof relay box. Like a trail map for your wiring, our relay box is the most efficient way to consolidate, organize, and keep track of all your aftermarket accessories. Boasting a six relay/fuse capacity, this relay box is more than capable of powering and protecting up to six independent circuits.
- Durable Nylon 66 Construction
- IP65 Waterproof
- 6 Relay and Fuse Sockets
- Comes with ALL Needed Seals and Terminals
What's Included?
- (1) Waterproof Fuse Relay Box
- (1) Pack of Relay Rubber Pads
- (1) Pack of Fuse Rubber Pads
- (1) Pack of Relay Wire Terminals
- (1) Pack of Fuse Wire Terminals
- (1) Pack of Brackets and Fasteners
- (1) Rubber Gasket
- (1) Waterproof Ring
- (1) Instruction Manual
Details & Specs
- Front Dimension: L1: 8-13/16", L2: 6-7/16", H1: 3-3/4", H2: 3-3/16",M1: 5-7/8", M2: 8-5/16"
- Side Dimension: W1: 6", W2: 3-15/16", M3: 3-3/32", M4: 5-1/2"
- Package & Dimension: Length (In): 6.25, Width (In): 2.63, Height (In): 2.88
Amazon's Price:
Blue Sea Systems 8-Circuit Fuse Holder
Blue Sea Systems ST Blade ATO/ATC Fuse Blocks
ST Blade ATO/ATC fuse blocks consolidate branch circuits and eliminate the tangle of in-line fuses for electronics and other appliances. Their robust design makes them ideal for marine and vehicle DC electrical systems. All buses and fuse clips are tin plated copper for corrosion resistance and optimal electrical conductivity. All ST Blade fuse blocks utilize a specialized fuse clip that is designed to hold fuses in place in the harshest conditions. All fasteners are stainless steel. Screws contain a captive star lock washer for a faster more secure installation. Studs utilize flange nuts for a simpler and safer installation. Fuses sold separately. Additional Key Features Include: Ground Bus: For DC negative connections. (5024, 5025, 5030, 5026, 5031, and 5032). Includes Cover: Easy to open insulating cover that provides access to fuses and satisfies ABYC/ USCG requirements. (5023, 5024, 5045, 5046, 5035, 5025, 5028, 5026, 5029 and 5032). Independent Source: Each circuit contains an individual feed wire. (5035 and 5037). Common Source: Single feed wire supplies power to all circuits in the fuse block. (5023, 5024, 5045, 5046, 5025, 5030, 5028, 5033, 5026, 5031, 5029, 5034, and 5032). Split Bus: Allows two isolated groups of 6 circuits each. (5032 only). Ignition Protection: Allows for use in a gasoline engine compartment. Meets ISO 8846 and SAE J1171 external ignition protection requirements. (5023, 5024, 5045, and 5046).Amazon's Price:
10 AWG In-Line Blade ATC/ATO Waterproof Fuse Holder
- Heavy duty 10 gauge(AWG) In-line fuse holder Cable for ATC/ATO type fuses (Blade Large Size Fuse Holder).
- Waterproof design, rubber cap fits tightly to protect the fuse inside any standard blade. It's not easy to fall off or drain, so you can easily modify your car's electronics in a safe way. Don't worry about bursting or overloading that can damage your car's power train.
- Built-in fuse holder for standard blade fuses, suitable for 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 30A, 40A,50A,60A, ideal for car boat truck auto use,added protection to the circuit.
- Material:copper+rubber,fuse holder size: 3.1 x 2.4 x 0.6 inch.
- Package Included: 1 X 10AWG Blade Fuse Holder .Fuse not included.
Amazon's Price:
10-Way 12V Blade Fuse Box W/LED Indicator & Cover
This 10 way ATC/ATO blade fuse holder box is compact, yet rugged in construction. LED illuminated, the red LED indicator light allows you to quickly diagnose which of the fuse has “popped”. This fuse panel has a #10-32 stud for power feed, .250” male quick disconnect terminals, can take an input voltage of 10 – 32 V DC, can handle a maximum of 30 Amp per circuit with a maximum of 100 Amp per panel, and has a cover for additional protection.
Interchangeable/Compatible with:
All automobiles and devices equipped with a 10-32 Volt DC power source.
Features:
- High quality construction.
- Red LED illuminates when fuse is blown.
- Maximum of 30 Amp per circuit and 100 Amp per panel.
- Clear cover included for additional protection.
- 1 x Fuse Box with Cover