Additional information
| Manufacturer | Affordable Offroad |
|---|
Back to Ford Ranger Winch Bumpers
1993-1997 Ford Ranger Winch Bumper with Bull Bar
Master Fabricator Dan “Tubby” Billig gives you his Ford Ranger Modular Front Winch Bumper.
This bumper fits model years Ford Ranger from 1993 to 1997
- 3-Piece Modular bumper design
- End pieces 1/8″ thick bolt to the main center section 3/16″
- Available with optional bolt on Bull Bar Includes
- (2) 1″ thick shackle tabs
- 3/16″ Winch Mount with our trademark Bottle Opener
- Winch ready using the market standard 10″ x 4.5″ bottom foot mounting profile
- 3/16″ mounting brackets
- Easy Bolt-on Installation
- Hand built in the USA!
- This bumper will also fit the 1998-2011 Ranger if you ever decide to purchase one in the future
- All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.
Only logged in customers who have purchased this product may leave a review.
Related products
2019-2020 Ford Ranger Warn 103379 Trans4mer Full Grille Guard
The WARN 103379 Bolt-On Full Grille Guard is winch compatible, commercial-grade, and designed for the 2019-2020 Ford Ranger. It provides heavy-duty protection for the vehicle’s bumper, grille, fascia, and winch mounting system. Features a flat side member design with a stylized and replaceable rubber trim, includes 2" tubular cross members (one with welded tabs to mount lights), and includes durable, welded headlight guards. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. The WARN 103379 Bolt-On Full Grille Guard requires WARN PN 103322 mount system and is designed, tested, and made in the USA. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Bolt-on full grille guard for 2019-2020 Ford Ranger; Provides protection for the vehicle’s bumper, grille, fascia, and winch mounting system
- Features flat side member design with a stylized and replaceable rubber trim
- Includes 2" tubular cross members, one with welded tabs to mount lights, and durable, welded headlight guards
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Requires WARN PN 103322 mount system; Designed, tested, and made in the USA
Amazon's Price
1998-2003 Ford Ranger Warn Winch Bumper
** I think these Warn winch bumpers are expensive, and you have to piece them together. There isn't a part number for a complete setup. But since I've been asked about them, I'm adding it to the list. Warn only lists them for the 1998-2003 Ford Ranger. Not sure why it stops at the 2003 model year. They also no longer list them for the 1987 and older Ford Rangers. **
The Grille Guard kit: the foundation of the Trans4mer mounting system, a simple, bolt-on system that installs around the factory bumpers. Comprised of two uprights and two crossbars. This is an integral required component that provides the base for all other options. The original WARN Trans4mer can be configured in several ways to match your needs. This system is engineered so the Grille Guard uprights bolt directly to the vehicle's frame, and the Winch Carrier then bolts to the Grille Guard uprights. All components are sold separately, so you can configure the system to meet your needs.
Below are the individual parts you will need to order.
Grill Guard P/N 37133:
Winch Carrier P/N 29165:
Brush Guard P/N 30146 (optional):
2019-2020 Ford Ranger Warn 103322 Trans4mer Mid-Frame Mounting Kit
The WARN 103322 Base Winch Mount System is commercial-grade and designed for the 2019-2020 Ford Ranger and includes the mounting bracket as well as a mid-frame winch carrier. Pull-tested and certified to withstand 12, 000 lbs. of pulling force, allowing this winch mount to be compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity. The innovative design reduces the install time due to no cutting, drilling, or grinding required during installation. Includes provisions to mount lights and J-Hooks for recovery, and is designed, tested, and made in the USA. Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp. Note: this will restrict the use of adaptive cruiser control and front parking sensors.
- Base winch mount system for 2019-2020 Ford Ranger; Includes mounting bracket and mid-frame winch carrier
- Pull-tested and certified to withstand 12, 000 lbs. of pulling force
- Compatible with foot-down mounted winches up to 12, 000 lbs. in pulling capacity; Fits WARN winches such as Zeon, Zeon Platinum, VR, M8, XD9, and 9. 5xp
- No cutting, drilling, or grinding is required for installation allowing for reduced install time
- Includes provisions to mount lights and J-Hooks for recovery; Designed, tested, and made in the USA
Amazon's Price
1998-2011 Ford Ranger Winch Bumper with Bull Bar
Ford Ranger Modular Front Winch Bumper with Bull Bar
This bumper fits model years Ford Ranger from 1998 to 2011
- 3-Piece Modular bumper design
- End pieces 1/8" thick bolt to the main center section 3/16"
- Bolt on Bull Bar
- Includes (2) 1" thick shackle tabs
- 3/16" Winch Mount with our trademark Bottle Opener
- Winch ready using the market standard 10" x 4.5" bottom foot mounting profile
- 3/16" mounting brackets
- Easy Bolt-on Installation
- Hand built in the USA!
- All bumpers ship unfinished/bare metal and are ready for your paint, powder coat etc.
Reviews
There are no reviews yet.